Do I need a special TV to receive satellite program? Do I have to give up cable programs?

Do I need a special TV to receive satellite program? Do I have to give up cable programs?

You don't need a special TV, digital satellite broadcasting works with any existing type of TVs. You do NOT need to give up cable to receive satellite programs. Cable and satellite don't use the same singal input. Satellite receiver works like a DVD player, to make it simple.

DreamBox 500-S

DreamBox 500-S

The Dreambox 500-Si is the first Linux based DVB Receiver. This receiver runs on open-source software developed by hundreds of developers around the world. This is the ultimate machine. It has many differnet skins that can be applied to make the user experience completely customizable. If you're looking for a VERY powerful unit, and something to have fun on, this is the unit for you.

This unit has a great EPG and supports Personal Video Recording. You can attach this unit to your Windows based network at home and record your favourite tv programs right onto your hard drive.

Original Price: £140.00
Special Price: £65.60

DreamBox 500-Si wholesale price please contact us , we will give you at the best price!

DreamBox 500-Si wholesale

DreamBox 500-Si wholesale price please contact us , we will give you at the best price! (email address: info@dreamboxshops.co.uk)

DreamBox 500-S Specifications:

The DM 500-S is the smallest Linux satellite TV receiver, with 1 x Smartcard-Reader. 250 MHz IBM PowerPC Processor (350 Mips) 2 LED status Linux Operating System Full automatic service scan Supports directly bouquet-lists (indirect unlimited) Supports multiple LNB-Switching control (supports DiSEqC) 1 x Smartcard-Reader Unlimited channel lists for TV/Radio SPDI/F nterface for digital bit stream out (AC-3 / DTS) MPEG2 Hardware decoding Channel-change time <> Fully adaptable OSD in many languages (skin-support) 100Mbit full duplex Ethernet Interface Supports EPG (electronic program guide) 1 x Scart-interfaces (fully controlled by software) Video decoder: Video Compression MPEG-2 and MPEG-1 compatible Video Standard PAL and NTSC Video Formats 4:3 / 16:9 Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart) Letterbox precolating for 4:3 TV-Device Audio decoder: Audiokompression MPEG-1 & MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard TV-Scart: Output: FBAS,RGB,S-VHS over OSD selectable DBS-Tuner: Frequency Range 950 .. 2150 MHz Signal Level - 65 dBm .. - 25 dBm Signal-to-Noise Level 12 dB max. DBS-Tuner Input Connector F-Type female Input Impedance 75 Ohm AFC +/- 3 MHz Demodulation Shaped QPSK Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation Roll-off Factor 35 % Demultiplexing according ISO 13818-1 Ethernet: 100 MBit compatible, bi-direktional interface Function Update of Firmware and Preprogramming LNB Power and polarisation: LNB Current 500mA max. ; short-circuit-proof LNB Voltage vertical <> 11,5V at 400mA LNB Voltage horizontal <> 17,3V at 400mA LNB shut-off at Standby-Mode Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Output digital: Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical (AC3) Output analog: Output Level L/R 0,5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB Serielle Interface RS 232: Typ RS232 bidirectional Bit rate 115,2 kBit/s max. Plug Connector SUB-D-9 Function Update of Firmware and Preprogramming Power consumption: <> Input voltage: DC12V,alternating acurrent +/- 15% Extern power supply: Input: 110-240V AC / 50-60Hz / 0,6A Output: 12V = / 1A Others: Ambient Temperature +15°C...+35°C Humidity <>

CubeCafe 200S digital satellite receiver
CubeCafe 200S CubeCafe 200S Improved Features Powerful IBM Power PC implemented. Faster CPU performance : 350MIPS(252MHz) Dolby AC-3 (SPDIF output for High-Fi Audio) Faster channel change time between different TPs. (less then 1sec) Improved tuner sensitivity for high quality and better reception. Additional OSD language available. User friendly larger font size. Faster response between Remote Control Unit via STB PACKING DETAILS INNER BOX: 1pc/gift box BOX SIZE PCS/CTN: 5pcs /CTN CTN SIZE: 40cm*32.5cm*53cm G.W: 11.756KGS CONTAINER LOAD CAPACITY 1x20' /1x40' /1x40HQ
Specifications MPEG-2 PSI, DVB-S, and DVB-SI Features Multilingual User Interface Fast & Easy to use OSD Set all values for searching programs in one menu page Satellite List by exclusive RCU button Subtitle & Teletext (OSD) Aspect Ratio: 4:3, 16:9 LINUX open source(some parts under the terms of GPL, accordingly expandable) 4,000 Channels Programmable Powerful Channel Sorting and Grouping Favorite Channel Lists for TV Parental Control & Radio and Video Mode "ETHERNET SUPPORTED" Improved Features Powerful IBM Power PC implemented. Faster CPU performance : 350MIPS(252MHz) Dolby AC-3 (SPDIF output for High-Fi Audio) Faster channel change time between different TPs. (less then 1sec) Improved tuner sensitivity for high quality and better reception. Additional OSD language available. User friendly larger font size. Faster response between Remote Control Unit via STB	[CubeCafe 200S] User's Manual, Read carefully before use 20061013_New_200SManual.pdf (3.53 MB) S/W UPGRADE [CubeCafe 200S] 2.16 version PAL Type. June-01-2007 [CubeCafe 200S] 2.16 version NTSC Type. June-01-2007 If you are interested in the CubeCafe 200S, please contact us for more information. Email: crownsat@gmail.com MSN: crownsat@gmail.com

CubeCafe 200S SPECIFICATION

Part Type Specification CPU Tuner & Channel Type IBM's Power PC405 Speed 350 MIPS Data/Instruction Cache 16KB/16KB Input Connector IEC169-24 female(F-type) Loop through Connector IEC169-24 female(F-type) Frequency Range 950MHz to 2150Mhz Loop through out Impedance 75 ohms nominal LNB Control Band selection 22 KHz tone Switch DiSeqC 1.0,1.1,1.2, USALS Polarization 13/18V(400mA Max/per each) MPEG Transport Stream & A/V Decording Transport Stream ISO/IEC 13818-1 Specification Aspect Ratio 4:3, 16:9 with pan vector Video Resolution 720*576(PAL) or 720 *480(NTSC) Audio Decoding MPEG-1 Audio Layer 1,2 NetworkMemory Ethernet RJ-45(10Base-T/100Base-TX) Flash Memory Up to 8MB SDRAM 32MB Conditional Access System Smartcard 1 slot (Xcrypt CAS, firecrypt CAS embedded) RF-Modulator RF-Connect 750hm, IEC 169-2, Male/Female Output Frequency 470 MHz to 860MHz Output Channel CH 21-69 TV Standard PAL D/K, B/G, PAL I/or NTSC A/V & Data In/Out TV SCART 1*SCART VCR SCART 1*SCART RCA Video*1, Audio *2 Data Interface 9 pin D-sub, RS232C Power Supply Input Voltage AC220V, 50Hz/or AC110V, 60Hz Power consumption 15W max (under 7W max. at stand-by mode) Physical Specification Size(W*H*D) 300 mm* 58 mm *235 mm Weight About 2.0 kg

IPBOX250S PVR digital satellite receiver

Click to enlarge IPBOX250S PVR digital satellite receiver

New model of Linux receiver with Harddisk drive opportunity.

LINUX O/S (IBM's PowerPC 405, 64 MB SDRAM) Smart Card reader(X-Crypt CAS, Firecrypt CAS) Harddisk Drive Ethernet 10/100, RS232 connection support Software upgrade trought internet Application and Expansion LINUX O/S enables ultimate applications and expansions to fulfill the customer's need Receiver is supplied in full configuration, after turning on is ready for use without any software upgrade: Full graphical OSD menu User friendly interface DiSEqC 1.0, 1.1 switches and DiSEqC 1.2 driving motors, USALS control supported Enhanced Search Channel Option: Search by all satellite Search by satellite/ network Search by all TP scanningSupport fast TXT (250 TXT pages in memory) Digital optical output SPDIF with AC3 supported Smart EPG Automatically updates Program Info Search programs by Genre on the EPG Enhanced timer setting/ EPG Modification settings and devices in PC Ethernet 10/100 port supported. Possibility to connect receiver to Internet and interface receivers through LAN automatic identification and configuration of network connection Possibility of automatic software upgrade through Internet Specifications: MPEG-2 PSI, DVB-S, and DVB-SI Fast & Easy to use OSD Set all values for searching programs in one menu page Satellite List by exclusive RCU button Subtitle & Teletext (OSD) Aspect Ratio: 4:3, 16:9 LINUX open source(some parts under the terms of GPL, accordingly expandable) 4,000 Channels Programmable Powerful Channel Sorting and Grouping Favorite Channel Lists for TV Parental Control & Radio and Video Mode "ETHERNET SUPPORTED" and external PSTN modem(dial up modem) supported 3.5” HDD or 2.5” HDD available and inner side of top cover mounted style CVBS, RGB, YUV, S-video supported Variable HDD Size is Applicable Multi Time Shifting Function - Unlimited trick play on any of Real Time Live Programs/ Recording Program/ Playback on Prerecorded Program Improved Features Powerful IBM Power PC implemented Faster CPU performance : 350MIPS(252MHz) Dolby AC-3 (SPDIF output for High-Fi Audio) Faster channel change time between different TPs. (less then 1sec) Improved tuner sensitivity for high quality and better reception. < Additional OSD language available. User friendly larger font size. Faster response between Remote Control Unit via STB Part Type Specification CPU Type IBM’s PowerPC405 Speed 350 MIPS Data/Instruction Cache 16KB/16KB Tuner Input Connector IEC169-24 female(F-type Loop through Connector IEC169-24 female(F-type) Input Signal Level -65 to -25dBm Frequency Range 950MHz to 2150MHz Loop through Out Impedance 75 ohms nominal Waveform QPSK(C/KU band compatible) 22KHz Tone Frequency 22±4KHz Amplitude 0.6±0.2V Symbol Rate QPSK( up to 45MS/s) LNB Control Band selection 22 KHz tone Switch DiSEqC 1.0, 1.1, 1.2, USALS Polarization 13/18V (400mA Max/per each) MPEG Transport Stream & A/V Decoding Transport Stream ISO/IEC 13818-1 Specification Aspect Ratio 4:3, 16:9 with pan vector Video Resolution 720 x 576(PAL) or 720 x 480(NTSC) Audio Decoding MPEG-1 Audio Layer 1,2 Network Ethernet RJ-45(10Base-T/100Base-TX) Memory Flash Memory Up to 8MB SDRAM 64MB Conditional Access System Smartcard 1 slot(Xcrypt, Firecrypt embedded)

MILWAUKEE 48-11-0080 Battery, MILWAUKEE 0216-1 Power Tool Battery

Replacement for MILWAUKEE 48-11-0080 Battery, MILWAUKEE 0216-1 Power Tool Battery, 15 Days Money Back and quality warranty!
Our Advantages: Quality + Low Price + 100% Guarantee + Fast Shipping

MILWAUKEE 48-11-0080 Battery, MILWAUKEE 0216-1 Power Tool Battery

Replacement for MILWAUKEE 48-11-0080 Battery, MILWAUKEE 0216-1 Power Tool Battery

Click to enlarge

• Item Code:
• Battery Type:
• Battery Capacity:
• Battery Volt:
• Battery Color:
• Battery Weight:
• Dimension:

• AUTME011
• Ni-Cd
• 1500 mAh
• 9.6V
• Red
• 510g
• 77.55x59.45x136.15mm

Brand new, 1 year warranty!
Original Price: AU $34.15
Special price: AU $29.70
Save: AU $4.45

Click here for shipping information
Order the MILWAUKEE 48-11-0080 Battery, MILWAUKEE 0216-1 Power Tool Battery Today - 1 Year Warranty, 15 Day Money Back No Risk Shopping, Secure Online Ordering Guaranteed!

This Power Tool Battery can replace the following part numbers:

• MILWAUKEE
  

  48-11-0080

This Power Tool Battery is compatible with the follow models:
MILWAUKEE

0210-1	0212-1	0216-1
0217-1	0218-1	0219-1
0319-1	0391-1	0394-1
0396-1	0397-1